Spring cone crusher
Brief Introduction：Low power consumption and high production efficiency.
Application：Above medium hardness ores and rocks, such as iron ore, copper ore, limestone, granite, quartz, etc.
Product Improvement：The movable cone swings close to discharge opening of crushing cavity, which intersects an equal parallel strip between them to make end products granularity. Adopting dry oil and water sealing avoids the dust entering.
更新： 2018-01-10 08:34:46
1.Less consumption of wearing parts, low operating cost.
2.Laminating crushing, better shape of finished product.
3.Hydraulic protection, hydraulic cavity clearing and high degree of automation, reducing downtime time.
4. Thin oil for lubrication, reliable and advanced, improving the service life.
5. A variety of crushing cavities, flexible, strong adaptability.
6. Easy maintenance, easy operation.
Cone crusher crushes materials by the working surface between the movable cone and fixed cone. So it is more advanced and efficient than jaw crusher. The movable cone is supported by spherical bearing and fixed on a hanging erect shaft which is set in the eccentric sleeve, and the sleeve is set on the stopping and pushing bearing. The movable cone and erect shaft are driven by the eccentric shaft sleeve together. The eccentric shaft sleeve is driven by horizontal shaft and fimbriae gear, and the wheel of the conveyor belt is driven by motor through v-belts. The lower part of vertical shaft is installed in the eccentric sleeve. When the eccentric sleeve rotates, there is a conical surface lined out by the shaft. When the movable cone comes near the fixed cone, rocks are grinded into pieces, when the movable cone leaves, grinded materials is discharged from the discharge hole. The fixed cone can be ascended or descended by adjusting setting to adjust the width of discharge hole, consequently the output size is determined adjusted.
Broken cone diameter mm
Max feeding size mm
Discharge outlet width mm